Face Recognition Terminal Timewatch UltraFace607TM
Ultra Face Recognition Terminal Timewatch UltraFace607TM a kind of attendance cum access control device integrated with temperature screening function.
It can fast take skin-surface temperature and upload abnormal temperature event to the centre, which can be widely applied in multiple scenarios, such as enterprises, stations, dwellings, factories, schools, campus and so on.
Supports Vanadium Oxide uncooled sensor to measure the target’s temperature.
Temperature measuring range: 30 °C to 45 °C (86 °F to 113 °F), accuracy: ± 0.5 °C without black body
Recognition distance of 0.3 to 1.8 m.
Fast temperature measurement mode: Detects face and takes body temperature without identity authentication.
Multiple authentication modes are available: card and temperature, face and temperature, card and face and temperature, etc
Face mask-wearing alert.
If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance is valid.
Forced mask-wearing alert If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance will be failed.
Triggers voice prompt when detecting fever.
Configurable door status (open/close) when detecting fever.
Transmits online and offline temperature information to the client software via TCP/IP communication and saves the data on the client software.
face recognition terminal＜0.2 s/User; face recognition terminal accuracy rate ≥ 99%
6,000 face capacity, 6,000 card capacity, and 50,000 event capacity
Suggested height for face recognition between 1.4 m and 1.9 m
Supports 6 attendance status, including check-in, check out, break-in, break out, overtime in, overtime out
Watchdog design and tamper function
Audio prompt for authentication result
NTP, manually time synchronization and auto synchronization
Connects to external access controller or Wiegand card reader via Wiegand protocol
Imports and export data to the device from the client software