Security Boom Barrier by eSSL BG100
The security boom barrier function is temporarily set. The user can automatically adjust the parameters according to the needs of the environment.
A boom barrier, sometimes known as a boom gate, is a pivoting bar or pole that blocks automotive or pedestrian passage via a restricted location. A boom gate’s tip often rises in a vertical arc to a near-vertical position.
Security Boom Barrier by eSSL BG100 is frequently counterweighted, allowing the pole to be tipped easily. Boom gates are frequently linked end to end or offset to obstruct traffic in both directions.
Some boom gates additionally feature a second arm that hangs 300 to 400 mm below the top arm when the barrier is lowered, increasing approach visibility, and hangs on links so it lies flat with the main boom when the barrier is raised.
This sort of automatic security barrier is the most prevalent approach for restricting entry and traffic flow into a restricted area.
Boom gates are a low-cost solution to improve protection and privacy, monitor and regulate traffic flow in and out of your property, and save money all at the same time.
Uses
Security Boom Barrier by eSSL BG100 is used to manage vehicle entry to specific regions as well as the flow of traffic. Boom barriers are sometimes known as automatic boom gates.
Rather than being a gate, they resemble a bar or a pole. It is made out of a long arm that automatically lowers to obstruct the path of approaching cars.
Automatic boom barrier operation
The following controls can be used to run an automatic boom barrier:
- Remote control with a push button
- RFID tags / RFID readers / RFID tags / RFID readers / RFID readers
- Detectors of loops
- Sensors based on optoelectronics
Security Boom Barrier by eSSL BG100’s horizontal bars mounted on a pivot that slides up and down are known as boom barrier gates. By obstructing automobile and pedestrian movement, these barriers serve as a traffic control measure.
It also makes certain that a vehicle or person travels through it only after passing through the security check.
Security Boom Barrier By eSSL BG100 departure and entry points of industrial units, offices, corporate homes, residential areas, parking lots, toll tax plazas, and other locations, an automatic boom barrier provides security.
Pedestrian and vehicle traffic can be successfully controlled with the use of an automatic barrier. It can be used to improve security.
Product Specifications:
- Using a 24V safety voltage power supply, breaking through the traditional barrier gate 220V supply mode, the product is safer and more reliable to use
- The landing speed (0.6 ~ 2S) is adjustable, which can be adjusted for the fast rise and slow fall, to meet the needs of various environmental occasions (community, industrial park, high-speed toll station, check station, etc.)
- The digital control of the whole stroke of the brake lever is adopted to avoid the tedious process of mechanical limit adjustment.
- Unique anti-smashing function, completely through digital monitoring, the smashing force and response time can be adjusted, and the entire process does not need to add any auxiliary equipment, such as pressure radio waves, infrared induction, etc.
- The barrier function is temporarily set. With the buttons on the mainboard, the user can automatically adjust the parameters according to the need to adapt to different environments and the setting is simple.
- Ground sense interface: If the ground sense is installed normally when a vehicle is pressed on the ground sense coil during the fall of the pole, it will be turned to the lift. If the car does not leave the coil, pressing any key will not respond to the fall of the pole, but after the vehicle leaves the coil, the rod automatically drops.
- Support manual-open when power fails, and automatically reset when the power is on.
Reviews
There are no reviews yet.